HP Compaq Presario,Presario F558 Maintenance And Service Manual Download Page 55

Page: 55 / 122

Disconnect the display panel cable

(2)

and the backlight cable

(3)

from the inverter.

NOTE:

The display inverter is available using spare part number 431391-001.

Remove the display inverter.

If it is necessary to remove the display panel, remove the six Phillips PM2.5×5.0 screws

(1)

that

secure the display panel to the display enclosure.

Remove the display panel

(2)

from the display enclosure.

NOTE:

The display panel is available using spare part number 442877-002.

If it necessary to remove the display hinges, remove the two Phillips PM2.0×3.0 screws

(1)

that

secure each hinge to the display panel.

Component replacement procedures 47

Summary of Contents for Compaq Presario,Presario F558



























































































































Search results

Summary of Contents for Compaq Presario,Presario F558

Reviews:

Related manuals for Compaq Presario,Presario F558

Brands by name

Popular brands

HP Compaq Presario,Presario F558, Maintenance And Service Manual

Search results

Summary of Contents for Compaq Presario,Presario F558

Reviews:

Related manuals for Compaq Presario,Presario F558

Brands by name

Popular brands