manualshive.com logo in svg

HP Compaq Presario,Presario 2128, Release Note

Share
Download
HP Compaq Presario,Presario 2128 Release Note Download Page 18

Important Notes

18

SAN Director 2/128 Fabric OS 4.2.x Release Notes

Security: PKICERT 

utility, installing 

certificates

PKICERT v1.0.6 is the most current version of the PKICERT utility.
When running the PKICERT utility to install switch certificates in a fabric that 

did not previously contain switch certificates and now includes a SAN 

Director 2/128, select the option to specify that certificates are installed on 

only those switches that do not currently contain certificates. SAN Director 

2/128s are delivered with switch certificates preinstalled. Switches that 

were originally shipped with Fabric OS v2.5, v3.0, and v4.0 and have 

never installed and enabled Secure Fabric OS do not have certificates 

installed.
If you need to reinstall switch certificates in a SAN Director 2/128, follow 

these guidelines:

■

The host running PKICERT v1.0.6 must be connected to a proxy 

switch running Fabric OS v2.6.2, v3.1.2, or v4.2.

■

All switches in the fabric other than the SAN Director 2/128 can 

run v2.6.1, v3.1, v4.1 or newer firmware.

Security: selectelnet

If you try to log in to a switch through a sectelnet client while that switch is in 

the process of either booting or shutting down, you might see the message, 

Random number generation failed

. The message is printed by the 

sectelnet client because the switch Telnet service is not running (the service 

has either already been shut down (if the switch is shutting down), or is not 

yet established (if the switch is booting). If the switch is booting, wait a few 

seconds and try again.

Security: secure mode

If an upgrade from Fabric OS v4.0 to v4.1 or v4.2 is performed, followed 

by a downgrade to Fabric OS v4.0 and upgrade back to Fabric OS v4.1 or 

v4.2, the switch password state is reset and prompts the user for new secure 

mode passwords.

Security: secure mode, 

passwd Telnet

CAUTION: Using the 

passwd

 Telnet command in secure mode to change 

the password results in all sessions using that password being logged out, 

including the session that changed the password. 
This is expected behavior. The session terminates if you change the 

password in secure mode.

Security: SLAP counter

The SLAP counter is designed to work when all the switches in the fabric are 

in secure mode. All the switches in the fabric must be in secure mode for 

accurate SLAP statistics.

Security: SSH login

To properly connect SSH login, wait for secure mode to complete before 

rebooting or performing HA failover on the SAN Director 2/128. If secure 

mode is enabled and a reboot occurs before secure mode completes, SSH 

login does not connect and goes to the wrong MAC address, because the 

active CP changes after an HA failover.

Table 5:  Fabric OS Area Information (Continued)

Fabric OS Area

Description

Summary of Contents for Compaq Presario,Presario 2128

























Reviews:

No comments

Brands by name

Popular brands

Load more brands