manualshive.com logo in svg

HP Compaq Presario CQ56, Maintenance And Service Manual, Page: 17 / 110

Share
Download
HP Compaq Presario CQ56 Maintenance And Service Manual Download Page 17

Right side

NOTE:

Your computer may look slightly different from the illustration in this section.

Component

Description

(1)

Optical drive (select models only)

Reads and writes to an optical disc.

(2)

Optical drive light (select models only)

Blinking: The optical drive is being accessed.

(3)

USB port

Connects an optional USB device.

(4)

AC adapter light

●

Blinking white: The computer is in the Sleep state
(Windows) or Suspend state (Linux).

●

White: The computer is connected to external power.

●

Amber: The computer is charging.

●

Off: The computer is not connected to external power.

(5)

Power connector

Connects an AC adapter.

(6)

Security cable slot

Attaches an optional security cable to the computer.

NOTE:

The security cable is designed to act as a deterrent, but

it may not prevent the computer from being mishandled or stolen.

Right side

9

Summary of Contents for Compaq Presario CQ56















































































































Reviews:

No comments