HP Compaq NX6130 Maintenance And Service Manual Download Page 157

Page: 157 / 199

Specifications

Maintenance and Service Guide

7–15

IRQ11*

Intel 82801FB/FBM USB Universal Host Controller - 2659

Intel 82801FB/FBM USB Universal Host Controller - 265A
Broadcom NetXtreme Gigabit Ethernet #2

SoundMAX Integrated Digital Audio

IRQ12

Synaptics PS/2 TouchPad

IRQ13

Numeric data processor

IRQ14

Primary IDE channel

IRQ15*

Not assigned

*Default configuration; audio possible configurations are IRQ5, IRQ7, IRQ9,
IRQ10, or none.

✎

PC Cards may assert IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, or
IRQ15. Either the infrared or the serial port may assert IRQ3 or IRQ4.

Table 7-11

System Interrupts

(Continued)

Table 7-12

System I/O Addresses

I/O Address

(hex)

System Function

(shipping configuration)

000 - 00F

DMA controller no.1

010 - 01F

System board resources

020 - 021

Interrupt controller no.1

022 - 023

Unused

024 - 03F

System board resources

040 - 043

System timer

044 - 04D

Unused

04E - 04F

System board resources

050 - 053

System board resources

Summary of Contents for Compaq NX6130








































































































































































































Search results

Summary of Contents for Compaq NX6130

Reviews:

Related manuals for Compaq NX6130

Brands by name

Popular brands

HP Compaq NX6130, Maintenance And Service Manual

Search results

Summary of Contents for Compaq NX6130

Reviews:

Related manuals for Compaq NX6130

Brands by name

Popular brands