B–2
Maintenance and Service Guide
Power Cord Set Requirements
General Requirements
The requirements listed below are applicable to all countries or
regions.
■
The length of the power cord set must be at least 1.5 m
(5.0 ft) and a maximum of 2.0 m (6.5 ft).
■
All power cord sets must be approved by an acceptable
accredited agency responsible for evaluation in the country or
region where the power cord set will be used.
■
The power cord sets must have a minimum current capacity
of 10 amps and a nominal voltage rating of 125 or 250 V AC,
as required by each country’s or region’s power system.
■
The appliance coupler must meet the mechanical
configuration of an EN 60 320/IEC 320 Standard Sheet C13
connector for mating with the appliance inlet on the back of
the notebook.
Summary of Contents for COMPAQ NC4200
Page 65: ...4 4 Maintenance and Service Guide Illustrated Parts Catalog Notebook Major Components ...
Page 67: ...4 6 Maintenance and Service Guide Illustrated Parts Catalog Notebook Major Components ...
Page 69: ...4 8 Maintenance and Service Guide Illustrated Parts Catalog Notebook Major Components ...
