HP Compaq d260 MT, Reference Manual, Page: 15 / 120

Service Reference Guide, d260 377977-AA1 2–5
Setup Utilities and Diagnostics Features
Post Delay Time
(in seconds)
Sets the amount of time before the setup Utility prompt
(F10=setup) appears when the computer boots.
• None: POST Delay Time disable (Default)
• 5: POST Delay 5 seconds
• 10: POST Delay 10 seconds
• 15: POST Delay 15 seconds
• 20: POST Delay 20 seconds
System Keyboard Detects if a keyboard is present when the Computer boots.
Absent: keyboard not detected (Default)
Present: keyboard detected
Internal Graphic
Mode Select Selects the size of memory for internal graphic adapter.
• 1MB: Share 1MB
• 8MB: Share 8MB (Default)
• 16MB: Share 16MB
Quick Power On
Self Test Enable this item to shorten the power on testing (POST) and
have your system, start up faster. The available setting values
are: Disabled and Enabled.
Boot Other Device With this function set to Enabled, the system will boot from some
other devices if the first/second/third boot devices failed.
Boot Up NumLock
Status
Add-On ROM
Display mode
This item defines if the keyboard Num Lock key is active when
your system is started.
Power
management ACPI Standby
State setup Sets the ACPI Standby State when system goes into ACPI
standby Mode.
• S1/POS: Power on Suspend
• S3/STR: Suspend to RAM(Default)
Restore on
AC/Power loss Sets the system status after AC power loss.
• Power off: system always powers Off (default)
• Power on: system always powers
• Last state: system returns to the last state before AC power
loss.
Resume on PME
wake on alarm
item
Sets the resume on PME from soft off
• Disable: PME resume disable
• Enable: PME resume enable (Default)
Computer
Setup
Heading Option Description