Remove the microphone:
1.
Unsolder the microphone cables
(1)
from the system board microphone connectors.
NOTE:
When installing the microphone, the red microphone cable should be soldered to the
system board “positive” terminal. The black microphone cable should be soldered to the system
board “negative” terminal.
2.
Release the microphone
(2)
from the molding built into the display panel assembly.
3.
Remove the microphone and cable.
Reverse this procedure to install the microphone.
20
Chapter 5 Removal and replacement procedures
Summary of Contents for Compaq 8 1400
Page 4: ...iv Safety warning notice ...
