Display panel assembly
NOTE:
The display panel spare part kit includes the touchscreen control board, but does not include the
touchscreen control board cable or display cable.
Description
Spare part number
Display panel, 12.3 in BrightView Ultra Wide Aspect Ratio, WLED (2400 × 1600) ultraslim, eDP 1.3 + PSR
L17082-001
Display cable
L17069-001
Touchscreen control board cable
L17068-001
IMPORTANT:
Make special note of each screw and screw lock size and location during removal
and replacement.
Before removing the display panel, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
Remove the display panel:
1.
Insert a case insertion tool between the base enclosure and the slate screen(1).
2.
Lift the display panel up and to the rear(2).
CAUTION:
Use care when rotating the display panel to avoid damaging the touch panel control board
and display panel cables.
3.
Release the touchscreen control board cable (1) from the zero-insertion force connector attached to the
base enclosure.
4.
Remove the adhesive cover (2) from the display panel cable (3).
5.
Release the display panel cable from the ZIF connector on the base enclosure (4).
20
Chapter 5 Removal and replacement procedures for authorized service provider parts
Summary of Contents for Chromebook PC
Page 4: ...iv Safety warning notice ...
