manualshive.com logo in svg

HP Chromebook 14 G5, Maintenance And Service Manual

Share
Download
HP Chromebook 14 G5 Maintenance And Service Manual Download Page 51

f.

Disconnect the display panel cable (3) from the display panel.

The display panel cable is available using the following spare part numbers L15395-001 (for use only 
on computer models equipped with a TouchScreen display assembly) and L14338-001 (for use only 
on computer models equipped with a non-TouchScreen display assembly):

g.

Remove the display panel.

The display panel is available using the following spare part numbers:

●

L14347-001 – For use only on computer models equipped with an FHD BrightView TouchScreen 
display assembly

●

L14348-001 – For use only on computer models equipped with an HD BrightView TouchScreen 
display assembly

●

L14349-001 – For use only on computer models equipped with an FHD AntiGlare non-
TouchScreen display assembly

●

L14350-001 – For use only on computer models equipped with an HD AntiGlare non-
TouchScreen display assembly

Component replacement procedures

45

Summary of Contents for Chromebook 14 G5





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands