HP 802.11g printer card User’s Manual
5
Chapter 1 - Introduction
The CB001A CF Card gives you the freedom to work your way, from wherever you
want. An enhanced 802.11g featuring advanced silicon chip design from Marvell
capable of delivering data transfer rates up to 54Mbps.
Features
•
Compact Flash Type-I form factor.
•
IEEE 802.11g compatible.
•
Backward compatible with IEEE 802.11b standard.
•
Wire-free access to networked resources from anywhere beyond the desktop.
•
Delivers data rate up to 54 Mbps.
•
802.11g: Dynamically shifts between 54, 48, 36, 24, 18, 12, 9 and 6 Mbps
network speed, based on signal strength, for maximum availability and
reliability of connection.
•
802.11b: Dynamically shifts between 11M, 5.5M, 2M, and 1 Mbps network
speed, based on signal strength, for maximum availability and reliability of
connection.
•
Allows users move between Access Points without resetting their connection
reconfiguration.
•
Built-In PCB antenna with diversity design (Two antennas required).
•
Support advanced power management and power saving mode.
•
Low CPU utilization through scatter gathers bus-mastering DMA architecture.
•
Uses 2.4GHz frequency band, which complies with worldwide requirement.
•
Fallback rat algorithm that sets the optimum transmission rate based on
actual signal-to-noise ratio and packet loss information
•
Supports most popular operating systems: Window 98SE/2000/ME/XP and
WinCE/Linux.
•
Ensures great security by providing the 64/128 bits Wired Equivalent Privacy
(WEP) and WiFi Protected Access (WPA) defined in the IEEE standard.
•
802.11i and WPA2 Support
•
802.11e (WMM) Support
•
Future driver upgradeable