The information contained in this document is subject to change without notice.
TO THE EXTENT ALLOWED BY LOCAL LAW, HEWLETT-PACKARD MAKES NO WARRANTY OF ANY KIND
WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
To the extent allowed by local law, Hewlett-Packard shall not be liable for errors contained herein or for
incidental or consequential damages in connection with the furnishing, performance, or use of this
material.
A copy of the specific warranty terms applicable to your product and replacement parts can be obtained
from your local Sales and Service Office.
New editions of this guide are issued to reflect extensive changes made to the application. Revisions may
be issued between application versions to correct errors in the manual. There may not be a new edition
issued in conjunction with every application version release. The application version at the date of
printing is noted in the following table.
Notice
Warranty
Printing history
We want to hear from you. If you have any
comments, questions, or suggestions about our
documentation or support, send them to:
Email: [email protected]
Fax: +61 3 9210 5570
Phone: +61 3 9272 8633
Hewlett-Packard Australia Ltd
Communications Measurements Division Australia
PO Box 221
Blackburn, 3130
Victoria, Australia
Product support
Printed in Australia
© Hewlett-Packard Australia Ltd 1997
All rights reserved.
Copyright
Manual Name:
Setting Up the 25.6 Mb/s Interface Pod
Manual Part Number:
E5129-90001
Product Model Number: HP E5129A
Visit the Broadband Service Analyzer web site at http://www.hp.com/go/atmanalyzer
Edition
Printing Date
Application Version
1
October 1997
A.02.0
