Upgrading and Servicing Guide
53
3
Reconnect the plugs (
F
) at the top of the card.
4
Reconnect the five SATA data cable plugs (
D1
–
D5
).
5
Insert new tie-wraps (
C
) through the anchors and around the SATA data cables, and
then tighten the tie-wraps to secure the cables.
6
On the left side of the computer inside the hard disk drive drawer bay, reconnect the
the power plug (
A
) to the SATA backplane (
B
).
7
Replace all the hard disk drives or the drive drawers into the chassis. See “Adding or
replacing a hard disk drive” on page 34.
8
Close and replace the right access, replace the thermal divider, replace and close the
PCI door, close the left access door and the computer. See “Opening and Closing the
Computer” on page 1.
A
B