•
Status — the overall status of the device
The device is fully operational and no user interaction is required.
User attention is necessary, but the device can still perform most operations.
User intervention is required and the device is not capable of performing some operations.
•
Cartridge in Transport — the slot number where the tape currently in the robot originated.
None if there is not a tape in the robotic.
•
Odometer — the total number of moves the device has performed since its manufacture.
•
Total Power On Time — the number of days, hours, and minutes that the device has been
powered on since its manufacture.
•
Robotic Status — the current status of the robotics and a description of the operation the robot
is currently performing.
•
Internal Temperature — the internal temperature reported by the device.
•
Media Removal — Prevented, if the backup software is preventing media removal from the
device. When media removal is prevented, the mailslot and magazine functionality is disabled.
•
Left Magazine — Present, if the device senses the presence of the left magazine.
•
Right Magazine — Present, if the device senses the presence of the right magazine.
Viewing dynamic drive information
The
Status: Drive page (parallel SCSI)
,
, and
provide detailed information about the tape drive in the Autoloader. When you click
Refresh
, the
status is updated immediately.
Figure 32 Status: Drive page (parallel SCSI)
Remote management interface (RMI)
43
Summary of Contents for BL536A
Page 149: ...German laser notice Italian laser notice Japanese laser notice Laser compliance notices 149 ...
Page 151: ...Danish notice Dutch notice Estonian notice Finnish notice French notice Recycling notices 151 ...
Page 155: ...French battery notice German battery notice Battery replacement notices 155 ...
Page 156: ...Italian battery notice Japanese battery notice 156 Regulatory compliance and safety ...
