HP BL536A, User'S & Service Manual

Page: 110 / 165

Main error code descriptions
Table 32 Main error codes
Details and solution Description Error code
Power-cycle the unit and retry the operation. Cannot initialize bar code reader 80
No response from bar code reader 81 •
Power-cycle the unit and retry the operation.
•
Update the firmware to the latest version.
Power-cycle the unit and retry the operation. No response from EEPROM on robotic controller 82
Setting of gripper
1
motor parameters failed 84 •
Power-cycle the unit and retry the operation.
Setting of slider
2
motor parameters failed 85
•
Update the firmware to the latest version.
Setting of elevator
3
motor parameters failed 86
Setting of rotation
4
motor parameters failed 87
Setting of sled
5
motor parameters failed 88
110 Troubleshooting