HP BL10e - HP ProLiant - 512 MB RAM Quickspecs Download

Page: 5 / 23

HP ProLiant BL e-Class Integrated Administrator ver. 1.40 Features

Out-of-band local console and remote network access to the server blade enclosure and all 20 server blades via
(one) RJ-45 10/100T Fast Ethernet and (one) RS-232 management connectors
Provides local and remote access to the ProLiant BL e-Class C-GbE Interconnect Switch command console and
browser-based management interfaces
SNMP, Web (via HTTPS) and command-line interfaces (via Console connector, Telnet and Secure Shell)
Remotely power on/off/reboot server blades and enclosures
Remotely toggle on/off unit identification LEDs (UID) of server blades and enclosures
Monitors and controls the enclosure fans, temperature sensors, power supplies, interconnect switch and server blade
status
Connect to each server blade's serial text console for enabling full control over server blade's
Power-On Self Test (POST) and boot process, including the ROM-Based Setup Utility (RBSU).

NOTE:

NOTE: For ProLiant BL10e G2 server blades running Windows® 2000 Server, there is now available a Serial
Console for Windows utility that provides serial-based administrative functionality using the Integrated
Administrator remote console feature. For more information and to download the Serial Console for Windows
utility, go to the following page:

http://www.compaq.com/support/files/server/us/locate/20_2611.html

User administration for up to 25 users. Server blade bay privileges can be set on a per-user basis
Virtual NMI button generates non-maskable interrupt for crash debug and analysis
Support for Network Time Protocol (NTP)
IP Security feature limits access to user-specified IP addresses
AlertMail enables email alerts for system events
More than 100 scriptable commands enable automated management
Selective enabling of all protocols, such as Telnet
Logging of operating system console, server blade and enclosure hardware events, user actions and invalid login
attempts
Emergency server blade enclosure shutdown caused by a critical temperature
Enclosure Link (2) connectors reserved for future use.

CAUTION:

CAUTION: The enclosure link (RJ-45) connectors on the interconnect tray are not to be used. Connecting an
external device to these enclosure link (RJ-45) connecters may damage your external device.
For more information on the ProLiant BL e-Class Integrated Administrator, please visit the Web site at:

http://www.compaq.com/products/servers/proliant-bl/e-class/integrated-admin.html

HP ProLiant BL e-Class C-GbE Interconnect Switch Features

Provides up to a 40-to-1 reduction in network cables for each server blade enclosure using a pair of non-blocking
layer 2 switch modules
Four RJ-45 10/100/1000T Gigabit Ethernet uplinks
Forty 10/100T Ethernet ports dedicated to server blade-to-interconnect switch network communications
Communicate with all 40 server blade network controllers through any one uplink connector and the management
connector
Spanning tree protocol for loop-free path redundancy
Browser, scriptable CLI, and console-based interfaces for local and remote interconnect switch management
Manage entire interconnect switch through the Integrated Administrator connectors or any uplink connector
Telnet, RMON and SNMP support; SNMP-based scripting utility with example scripts
256 Port-based IEEE 802.1Q tagged VLANs per switch processor module
IGMP (internet group management protocol) snooping and quality of service (QoS) packet prioritization
TFTP server support for rapid deployment of multiple interconnect switches and to provide backup and restore
capabilities
Industry-standard design compatible with industry-standard network components from leading network
manufacturers
Fully pre-configured for rapid deployment and immediate operation in ProLiant BL e-Class enclosure
For more information on the ProLiant BL e-Class C-GbE Interconnect Switch, please visit the Web site at: