EL-MF877-00
Template Revision A
Page 2
List the type and size of the tools that would typically be used to disassemble the product to a point where
components and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Torx screwdriver
T10/T20/T25
Cross-head screwdriver
Description #3
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective
treatment:
1.
Use T25 screwdriver to remove the 4 screws on the chassis
2.
Use Cross-head screwdriver to remove the 3 screws on the TOP
3.
Use T25 screwdriver to remove the 6 screws on the bottom
4.
Remove the antenna cable from PCBA.
5.
Use Cross-head screwdriver to remove screws on the PCBA and AC
Module. 6.
7.
8.
3.2 Graphic.
AP-377
1
．
Use T25 screwdriver to remove the 4 screws on the holder
2. Use T25 screwdriver to remove the 6 screws on the Top Cover
2.0 Tools Required
