HP Aruba 7010 Series, Installation Manual, Page: 8 / 28

8
| 7010 Controller
Aruba 7010 Series Controller
| Installation Guide
7010 Components
This section introduces the component and its location in the Aruba 7010 controller.
Figure 1 shows the front panel of the Aruba 7010 controller and Figure 2 shows the back panel of the Aruba 7010
controller.
Figure 1 Front Panel of the Aruba 7010 Controller
Figure 2 Back Panel of the Aruba 7010 Controller
The following table lists the components on the Aruba 7010 controller:
Optional accessories are available for use with the Aruba 7010 controllerand are sold separately. Contact your
Aruba sales representative for details and assistance.
Table 4
Aruba 7010 Controller Components
Callout Component Description
1 Access Ports 16 x10/100/1000BASE-T Ethernet ports

Orange numbering: Indicates that the port supports PoE/
PoE+

Gray numbering: Indicates that the port does not support
PoE
2 Uplink Ports 2 x 1000BASE-X ports
3 Power, Status, and Peered LEDs Used for basic monitoring of the Aruba 7010 controller
4 LCD Used to configure LCD behavior and other basic operations
5 Menu Button Used to select the LCD screen menu
6 Enter Button Used to execute actions on the LCD Screen
7 USB Interface 2 x USB 2.0, USB storage device can be used to save and upload
configurations