MF877-00 Page 3
Template Revision C, 30-July-2018
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at
4. Remove the Led board
1. Remove led cable
2.Using a Phillips screwdriver #1, remove the screws attaching the led board 2pcs
5. Remove the riser bracket
1. Using a Phillips screwdriver #2, remove the screws attaching the riser bracket 3pcs
6. Remove the one power supplies
1. Disconnect AC inlet & main PCBA cable connections.
2. Using a Phillips screwdriver #2, remove the screws attaching the power.
7. Remove the main board PCBA assembly
1. Using a Phillips screwdriver #2, remove the screws attaching the PCBA.
8. Remove the main PCBA
9. 9-Finish
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
