DRAFT - HP Confidential - DRAFT
Removal and replacement procedures 40
7.
Remove the drive backplane.
To replace the component, reverse the removal procedure.
Two-bay SFF hot-plug rear drive backplane
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION:
To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
To remove the component:
1.
Power down the server (on page
).
2.
Remove the server from the rack (on page
).
3.
Remove the access panel ("
).
4.
Remove the air baffle ("
).
5.
Disconnect all cables connected to the drive cage backplane.
