Procedure
1.
Install the node blank into the left side of the server chassis.
2.
Install the node blank into the right side of the server chassis.
Installing the RCM module option
Prerequisites
Observe the following rules and limitations when installing an RCM module:
• If a dedicated iLO management port module is installed in a node, the node cannot be accessed through
the RCM module.
• If a dedicated iLO management port module is installed in a node, the node can only connect to a network
dedicated iLO management port module
.
• If using the RCM module iLO ports or the dedicated iLO management port module to connect to a
network, the network must operate at a speed of 1 Gb/s. The server cannot connect to the network if the
network is operating at a speed of 10/100 Mb/s or 10 Gb/s.
78
Installing the RCM module option
