HP AdvanceStack 208, Hardware Installation Manual

Page: 48 / 112

4-12
Configuring the Switch From the Console
Configurable Features
C
onf
igur
ing the S
w
it
ch
F
rom
the C
ons
ole
SNMP Communities
This screen enables you to add, edit, or delete SNMP communities. Use this
feature if you expect to manage the Switch 208/224 from an SNMP manage-
ment station. You can configure up to five SNMP communities, each with
either an operator-level or a manager-level view, and either restricted or
unrestricted write access. (For more on this topic, refer to chapter 6, “Using
SNMP To Monitor and Manage the Switch”, and to the online Help.)
Figure 4-7. The SNMP Communities Screen (Default Values)
C a u t i o n
Deleting the community named “public” disables many network management
functions (such as auto-discovery, traffic monitoring, and threshold setting).
If security for network management is a concern, it is recommended that you
change the write access for the “public” community to “Restricted”.
How To Configure the Switch for SNMP Communities.
Ensure that the switch has been configured for IP and/or IPX service.
1. From the Configuration screen, select SNMP Communities to display a
screen similar to figure 4-7.
2. Press [A] (for
Add
) to display the following screen:
This screen gives an overview of the SNMP communities that are
currently configured. All fields in this screen are read-only.
Add and Edit options are used to modify
the SNMP options. See figure 4-8.
YUMAMOD.BK : 4_ymcnfg.fm5 Page 12 Thursday, February 20, 1997 12:54 PM