HP AA-RS2WC-TE, Installation Manual

Page: 135 / 242

Installing Core Switch 2/64 FRUs
135 Core Switch 2/64 V4.1 Installation Guide
Recording Critical Switch Information
1. Create a serial connection to the healthy CP card:
a. Disable any serial communication programs running on the workstation
(such as synchronization programs).
b. Insert a serial cable into the terminal serial port (second serial port from
the top; see Figure 20 on page 76).
c. Connect other end of serial cable to a serial port on the workstation.
If necessary, the adapter on the serial cable can be removed to allow for a
serial RJ45 connection.
d. Open the terminal emulator application and configure as follows:
— For Windows systems:
Parameter Value
Bits per second 9600
Databits 8
Parity None
Stop bits 1
Flow control None
— For most UNIX systems, enter the following string at the prompt:
tip /dev/ttyb -9600
e. When the terminal emulator application stops reporting information, press
Enter.
2. Log into the healthy CP card as Admin, then enter 0 to log into Switch 0 (see
Figure 30 ). The default password is password.
Figure 30: Sample output for logging into switch 0 from a serial console
Fabric OS (cp0)
cp0 Console Login: admin
Password:
Enter Switch Number to Login <0 or 1>: 0
SW0:admin>