HP AA-RLE1C-TE Getting Started Download Page 31

Page: 31 / 100

RTR Server Types

Note that one node can contain the primary servers for one key

range and standby servers for another key range to balance

the load across systems. This allows the nodes in a cluster

environment to act as standby for other nodes without having

idle hardware. When setting up a standby server, both servers

must have access to the same journal.

Figure 1–14 Standby Servers

VM-0833A-AI

Terminals

Frontends

Router

Backends

Database

Server

application

Standby

application

Client

application

Client

application

Client

application

Transactional
shadow server

The

transactional shadow server

places all transactions

recorded on the primary server on a second database. The

transactional shadow server can be at the same site or at a

different site, with networking capability available.
When one member of a shadow set fails, RTR remembers

the transactions executed at the surviving site in a journal,

and replays them when the failed site returns. Only after all

journaled transactions are recovered does the recovering site

fully process new online transactions. During recovery, new

transactions are processed at the surviving site and added to the

journal for the recovering site.

Introduction 1–19

Summary of Contents for AA-RLE1C-TE





































































































Search results

Summary of Contents for AA-RLE1C-TE

Reviews:

Related manuals for AA-RLE1C-TE

Brands by name

Popular brands

HP AA-RLE1C-TE, Getting Started

Search results

Summary of Contents for AA-RLE1C-TE

Reviews:

Related manuals for AA-RLE1C-TE

Brands by name

Popular brands