Configuration Commands
42
A6826A PCI-X Host Bus Adapter for Linux 64-bit Systems Installation Guide
NVRAM Parameter Commands
Use the following parameters to change NVRAM.
edit_adapter_settings
Used to display and modify the adapter settings. This parameter produces the
following sequence:
Adapter Settings:
Enable Hard Loop Id
Hard Loop Id
Loop Reset delay
Enable Fibre Channel Tape Support
Frame Size:
512
1024
2048
Connection Option:
0 - Loop Only
1 - Point To Point Only
2 - Loop Preferred, Otherwise Point-to-Point
Data Rate:
0 - 1 Gb/s
1 - 2 Gb/s
2 - Auto
