HP A5500 HI Series Installation Manual Download Page 60

Page: 60 / 62

Table 19

100/1000Base-X SFP port LED description

Port mode LED (Mode)

status

Port LED status

Description

Steady green
(rate mode)

Steady green

The port is operating at 1000 Mbps. The port LED fast

flashes when the port is sending or receiving data.

Steady yellow

The port is operating at 100 Mbps. The port LED fast

flashes when the port is sending or receiving data.

Flashing yellow (3 Hz)

POST has failed on the port.

Off

No link is present on the port.

Steady yellow
(duplex mode)

Steady green

The port is operating in full duplex mode. The port LED

fast flashes when the port is sending or receiving data.

Flashing yellow (3 Hz)

POST has failed on the port.

Off

No link is present on the port.

SFP+ port LED

Each SFP+ port has a status LED to show port operating status and activities. The port mode LED indicates
the type of information (for example, port rate or duplex mode) that the port LEDs are showing. You can

use the port LED mode switching button to change the type of displayed port information.

Table 20

SFP+ port LED description

Port mode LED

(Mode) status

SFP+ port LED status

Description

Steady green (rate

mode)

Steady green

The port is operating at 10 Gbps. The port LED fast

flashes when the port is sending or receiving data.

Steady yellow

The port is operating at 1 Gbps. The port LED fast

flashes when the port is sending or receiving data.

Flashing yellow (3 Hz)

POST has failed on the port.

Off

No link is present on the port.

Steady yellow (duplex

mode)

Steady green

The port is operating in full duplex mode. The port LED

fast flashes when the port is sending or receiving data.

Flashing yellow (3 Hz)

POST has failed on the port.

Off

No link is present on the port.

Interface card status LED

The interface card status LED shows the status of the interface card in the expansion interface card slot.

Summary of Contents for A5500 HI Series































































Search results

Summary of Contents for A5500 HI Series

Reviews:

Related manuals for A5500 HI Series

Brands by name

Popular brands

HP A5500 HI Series, Installation Manual

Search results

Summary of Contents for A5500 HI Series

Reviews:

Related manuals for A5500 HI Series

Brands by name

Popular brands