109
Figure 69
Add a local user
Table 10
Local user configuration items
Item Description
User Name
Enter a username. A username is case sensitive, and cannot contain any of these
characters: “/”, “\”, “:”, “|”, “*”, “?”, “<”, “>”, “@” and “"”.
IMPORTANT:
A username may contain spaces. However, leading spaces and trailing spaces are
always ignored. An all-space input is considered null.
User Privilege Level
Set the user privilege level of the user.
Service Type
Set the service type that the user can use, including FTP, SSH, Telnet, Terminal and PPP.
IMPORTANT:
For a user to log in to the Firewall through the web interface, you must select the service
type Telnet for the user.
Password
Set the password
Confirm Password
Reset the password, which must be the same with the previously set password.
Local user configuration example
Network requirements
As shown in
, configure a local user account on the firewall so that the firewall can perform
local authentication for the Telnet user.
Figure 70
Configure a local user account for a Telnet user
Configuration procedure
# Configure a local user.
•
Select
User > Local User
in the navigation tree and then click
Add
.
