manualshive.com logo in svg

HP 9000 rp8440, Quickspecs, Page: 10 / 24

Share
Download
HP 9000 rp8440 Quickspecs Download Page 10

Event notification to system console, e mail, pager, and/or HP Response Centers
Automatic hardware protection of critical environmental problems
Access to management interface and console(s) on LAN failure (modem required)
Auto system restart
Remote resetting of hardware partitions
Forward progress indicator (Virtual front panel)
Out of band Manageability and PDC firmware update
Configure manageability and console security
SSL

External LAN port: 1 GbE LAN port using an RJ 45 connector
External SCSI port: Ultra320 SCSI port for connections to mass storage or media.
Access to internal peripheral bay: The first core I/O card enables half of the HP 9000 rp8440
Server peripheral bay, which includes one removable media and two low profile disks. The second
core I/O card enables the remaining internal peripherals, two disks and one removable media
bays. Customers that require access to more than two internal disks and/or one removable media
slot must purchase the second core I/O card and more than one cell board.

The integrated multifunction I/O provides core I/O functionally and includes the Management Processor
technology.

Core I/O Loading Rules

Core I/O Loading Rules

Core I/O Loading Rules

Core I/O Loading Rules

1 Core I/O card is included with each HP 9000 rp8440 Server
Load the first Core I/O board into slot 0.
Core I/O slot 0 corresponds to Cell Board slot 0. Core I/O slot 1 corresponds to Cell Board slot
1.
A cell board must be installed in slot 0 to enable use of Core I/O 0. Likewise, a cell board must
be installed in slot 1 to enable use of Core I/O 1.
Access to two internal disk drives and one Removable Media bay is enabled with the installation of
the first Core I/O board.
The optional second Core I/O board must be ordered to enable hardware partitioning (systems
not using the Server Expansion Unit 2).
The optional second Core I/O board must be ordered to enable access to the third/fourth internal
disks and second removable media drive. (

NOTE:

NOTE:

NOTE:

NOTE: For support of 3 or 4 hard partitions

[nPartitions], a third and fourth core I/O board is included in the rp8440 Server Expansion Unit 2.
See the SEU 2 section for more details.

)

Internal Disk Drives

Internal Disk Drives

Internal Disk Drives

Internal Disk Drives

HP 9000 rp8440 Server supports up to four internal low profile hot plug disk drives.

QuickSpecs

HP 9000 rp8440 Server

HP 9000 rp8440 Server

HP 9000 rp8440 Server

HP 9000 rp8440 Server

Configuration

DA - 12697   North America — Version 4 — March 3, 2008

Page 10

Summary of Contents for 9000 rp8440

























Reviews:

No comments