HP 9000 rp7440 Quickspecs Download Page 9

PCI-X 2 port 1000Base T/2 port Ultra320
SCSI

AB290A

11i/Yes

2 LC GigE/2 RJ-

45

Yes / Yes

15 / 60

Wide Area Network Interface Cards

Wide Area Network Interface Cards

Wide Area Network Interface Cards

Wide Area Network Interface Cards

 

 

 

 

2 port Programmable Serial Interface
(PSI) X.25 / Frame Relay / SDLC

J3525A

11.00 / No

RS-530, RS-232,

V.35, RS-449 or

X.21

Yes / Yes

15 / 30

Additional Interface Cards

Additional Interface Cards

Additional Interface Cards

Additional Interface Cards

 

 

 

 

 

PCI 8 port Terminal Multiplexer

A6748A

11.00 / No

RS-232

Yes / No

15 / 120

PCI 64 port Terminal Multiplexer

A6749A

11.00 / No

RS-232 or RS-

422

Yes / No

15 / 960

PCI Hyperfabric2 Fiber Adapter

A6386A

11.00 / No

LC Duplex

Yes / Yes

4 / 4

 

 

 

 

External Server Storage

External Server Storage

External Server Storage

External Server Storage
Connectivity

Connectivity

Connectivity

Connectivity

HP has the broadest, most robust server and storage line up in the industry, providing exactly the right fit
for every need. Refer to the Storage Server matrix found in the introductory section of Chapter 4 to see a
matrix that highlights which storage device, server and operating system is interoperable.

Integrated Multi-function

Integrated Multi-function

Integrated Multi-function

Integrated Multi-function
Core I/O

Core I/O

Core I/O

Core I/O

The HP 9000 rp7440 Server chassis supports up to two core I/O board sets. Each board set contains
two cards (MP/SCSI and LAN/SCSI), which are installed in different locations. MP/SCSI cards are
installed along the right rear vertical edge of the chassis. The LAN/SCSI cards are installed in the PCI
card bay. The first core I/O board set will support up to two cell boards in the server and all I/O slots.
For support of two hard partitions or for support of the third and fourth integrated disk drive, a second
core I/O board set is required in the host system.

HP 9000 rp7410/rp7420/rx7620 Core I/O cards cannot be carried forward to the HP 9000 rp7440
server.

Both Core I/O board sets are identical. The "primary" and "secondary" Core I/O LAN/SCSI board is
supported by a 530 MB/s link. In addition, in the "primary" core I/O, a SCSI controller from both the
LAN/SCSI board and MP/SCSI board each support a single internal disk drive

 

 

 

Each HP 9000 rp7440 Server core I/O board set provides the following features:

 

Management Processor:

Management Processor:

Management Processor:

Management Processor: The management processor (MP), located on each MP/SCSI card, is a
dedicated processor that simplifies and extends system management, and also enhances
serviceability. The MP minimizes or eliminates the need for the system administrator to be
physically at the system to perform tasks such as diagnostics, system management, or even hard
resets. The MP in the rp7440 can be configured to failover to a secondary MP (again provided
two core I/O board sets are installed). Here are some of the features enabled by the HP 9000
rp7440 Server management processor:

System management over the Internet or Intranet (telnet or web)
System console redirection
Console mirroring
System configuration for automatic restart
Viewing history log of system events
Viewing history log of console activity
Setting MP inactivity timeout thresholds
Remote system control
Remote power cycle (except for MP housekeeping power)
Viewing system status

QuickSpecs

HP 9000 rp7440 Server

HP 9000 rp7440 Server

HP 9000 rp7440 Server

HP 9000 rp7440 Server

Configuration

DA - 12696   North America — Version 4 — March 3, 2008

Page 9

Summary of Contents for 9000 rp7440
























Reviews: