HP 8753D, User Manual, Page: 649 / 678

Example 4, 8510 3-T erm Frequency List Cal Set File
Example 4 shows how CITIle may be used to store instrument setup information. In the case
of an 8510 Cal Set, a limited instrument state is needed in order to return the instrument to the
same state that it was in when the calibration was done .
Three arrays of error correction data are dened by using three D A T A statements . Some
instruments require these arrays to be in the proper order , from E1 to E3. In general, CITIle
implementations should strive to handle data arrays that are arranged in any order .
Example
CITIFILE A.01.00
#NA VERSION HP8510B.05.00
NAME CAL_SET
#NA REGISTER 1
VAR FREQ MAG 4
DATA E[1] RI
DATA E[2] RI
DATA E[3] RI
#NA SWEEP_TIME 9.999987E-2
#NA POWER1 1.0E1
#NA POWER2 1.0E1
#NA PARAMS 2
#NA CAL_TYPE 3
#NA POWER_SLOPE 0.0E0
#NA SLOPE_MODE 0
#NA TRIM_SWEEP 0
#NA SWEEP_MODE 4
#NA LOWPASS_FLAG -1
#NA FREQ_INFO 1
#NA SPAN 1000000000 3000000000 4
#NA DUPLICATES 0
#NA ARB_SEG 1000000000 1000000000 1
#NA ARB_SEG 2000000000 3000000000 3
VAR_LIST_BEGIN
1000000000
2000000000
2500000000
3000000000
VAR_LIST_END
Continued next page
The CITIle Data Format and K eyword Reference A-5