4 Connecting to a Windows NT 4.0 Server
Windows for Workgroups
4 Connecting to a Windows NT 4.0 Server
Windows for
Workgroups
Requirements
•
HP Vectra with Windows for Workgroups 3.11 installed.
•
IBM Token-Ring 16/4 PCI adapter and drivers CD ver 1.2
•
Driver Name for Vectra VL8: IBMTRP.386 Size: 78K Date: 5/21/96
•
Driver Name for Vectra VE7/VE8: IBMTRPO.SYS Size 71K Date: 7/21/97.
•
Microsoft Windows NT 4.0 Server that supports Net BEUI, NWLink IPX/
SPX, and NWLink NetBIOS transfer protocols.
Device Configuration
Procedure
1
With the HP Vectra turned off, install the IBM 16/4 PCI TR adapter card
into a PCI slot.
2
Power on the machine and boot to Windows 3.11.
3
After Windows loads, open the “NETWORK” folder, and double-click the
“NETWORK SETUP” icon.
4
Select “Networks” and choose “Install Microsoft Windows Network” and
click on “OK.”
5
Click on “Drivers” then on “Add Adapter.”
6
With “Unlisted or Updated Network Adapter”, click on “OK.”
7
Insert the IBM Token-Ring PCI WOL drivers CD, set the path to “D:\”
(Where “D” is the drive letter assigned to your CD-ROM) and click “OK.”
(If you have an HP preloaded HDD, set the path to “C:\MASTERS\LAN
\TRPCI.WOL\”)
Vectra VL8
Vectra VE7/VE8
Card State
-
Enabled
Interrupt
11
10
I/O Address
C800-h
DC00-h
