HP 8153A, Operating And Programming Manual, Page: 121 / 290

6
Example OUTPUT 722;"*CLS"
*ESE
standard Event Status Enable command.
Syntax *ESE <wsp> <value>
0 value 255
Denition The *ESE command sets bits in the Standard Event Status
Enable register and thus enables the corresponding bits
in the Standard Event Status register . A 1 in a bit in the
enable register enables the same bit in the status register .
The value sent as an integer or a oating point number
(NRf).
The register is cleared at power-on. The *RST and *CLS
commands do not change the register .
T able 6-2.
The Standard Event Status Enable Register
BIT MNEMONIC Decimal
V alue
7 P ower On 128
6 Not used 0
5 Command Error 32
4 Execution Error 16
3 Device Dependent Error 8
2 Query Error 4
1 Not used 0
0 Operation Complete 1
Related Commands *ESE?
Example OUTPUT 722;"*ESE 21"
Remote Operation - Common Commands 6-5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com