HP E1509
Eight-Channel Fixed Filter and Amplifier
Signal Conditioning Plug-on
Introduction
The HP E1509 is a Signal Conditioning Plug-on that provides eight fixed
low-pass filters with a 3dB cutoff frequency of 7Hz and eight amplifiers
with gain of 64. Also provided is input over-voltage protection and open
transducer detection on each channel.
About this Manual
This manual shows you how to control the Signal Conditioning Plug-on
(SCP) using SCPI commands as well as Register-Based commands, and
explains the capabilities of this SCP. Finally, it covers specifications for this
SCP. The contents of this manual are:
•
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
•
Identifying the Plug-on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
•
Connecting To The Terminal Module . . . . . . . . . . . . . . . . . . 4
•
Programming With SCPI Commands . . . . . . . . . . . . . . . . . . 6
•
Programming With Register Commands . . . . . . . . . . . . . . . 8
•
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Installation
Installation for this Plug-on is common to several others and is covered in
Chapters 1 and 2 of your HP E1413/E1313 manual.
Identifying the Plug-on
You’ll find the HP part number on the connector side of the SCP to the left
of the serial number bar code. For the HP E1509, the part number is :
E1413-63519
Introduction
HP E1509 Fixed Amplifier SCP 3
Summary of Contents for 75000 B Series
Page 3: ......