HP Fingerprint Reader
(optional)
Mobile Voltage Operation
3.0V-3.6V
Operating Temperature
14° - 167°F (-10° - 75°C)
Current Consumption
Image
36 mA peak
Low Latency Wait for
Finger
950 uA
Capture Rate
3000. lines/sec
ESD Resistance
IEC 61000-4-2 4B (±15KV)
Detection Matrix
200*1 (plus another secondary line)
508 dpi
12*3 mm sensor area
NETWORKING/COMMUNICATIONS
Intel I218LM Gigabit
Network Connection
Connector
RJ-45
System Interface
Integrated on PCA
Controller
Intel I218LM GbE platform LAN connect networking controller
Memory
24 KB FIFO packet buffer memory
Data rates supported
10/100/1000 Mbps
IEEE Compliance
802.1P
802.1Q
802.2
802.3
802.3ab
802.3az
802.3u
Bus architecture
PCI Express and SMBus
Data transfer mode
PCIe-based interface for active state operation (S0 state) and SMBus for host
and management traffic (Sx low power state)
Power requirement
Requires 3.3V and 0.9V or just 3.3V with integrated regulators
Power consumption 0.733 Watts
Boot ROM support
Yes
Network transfer mode
Full-duplex
Half-duplex (not supported for the 1000BASE-T transceiver)
Network transfer rate
10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
1000BASE-T (full-duplex) 2000 Mbps
Environmental
Operating Temperature:
0° to 85° C
Operating Humidity:
60% RH
QuickSpecs
HP ProBook 640 G1 Notebook PC
HP ProBook 650 G1Notebook PC
Technical Specifications
DA - 14688 Worldwide — Version 8 — March 17, 2014
Page 30
