HP 6200YL Reference Manual Download Page 623 | Manualshive

Page: 623 / 765

background image

Range: < 1 to 21474836 >

■

snmp-server host

IPV6-ADDR

informs timeout

< 1 to 21474836 >

Specify the interval between retries for informs, in seconds.

Range: < 1 to 21474836 >

traps

■

[no] snmp-server enable traps

Usage: [no] snmp-server enable traps snmp-authentication <standard | extended>

[no] snmp-server enable traps port-security
[no] snmp-server enable traps login-failure-mgr
[no] snmp-server enable traps password-change-mgr
[no] snmp-server enable traps authorization
[no] snmp-server enable traps arp-protect
[no] snmp-server enable traps dhcp-snooping
[no] snmp-server enable traps dyn-ip-lockdown
[no] snmp-server enable traps link-change <PORT-LIST>

Description: Enable/disable event traps to be sent

by the switch.

Next Available Options:

■

link-change

-- Traps for link-up and link-down. ([ethernet] PORT-LIST)

■

snmp-authentication

-- Select RFC-1157 (standard) or HP-ICF-SNMP (extended) traps.

■

dhcp-snooping

-- Traps for DHCP-Snooping.

■

arp-protect

-- Traps for Dynamic ARP Protection.

■

dyn-ip-lockdown

-- Traps for Dynamic Ip Lockdown

■

auth-server-fail

-- Traps reporting authentication server unreachable.

■

password-change-mgr

-- Traps for management interface password change.

■

login-failure-mgr

-- Traps for management interface login failure.

■

port-security

-- Traps for port access authentication failure.

trap-source

■

[no] snmp-server trap-source

Usage: [no] snmp-server trap-source [IP-ADDR|loopback<0-7>]

Description: Specify the source ip-address policy for the trap pdu.

By default snmp trap pdu will contain the ip address of
the active interface on which trap will be sent. The default
behavior is in compliance to rfc-1517.
The no form of the command will revert to default behavior.

IP-ADDR

-- ip-address specified will be used as the source ip

address in the generated trap.

loopback 0-7

-- lexicographically minimum configured ip address on the

specified interface will be used as the source ip
address in the generated trap pdu.

Next Available Options:

■

-- IP Address for the source ip address field in the trap pdu. (IP-ADDR)

■

< 0 to 7 > -- For the specified loopback interface, lexicographically minimum configured

ip address will be used as the source ip address in the trap pdu.

621

©

2009 Hewlett-Packard Development Company, L.P.

snmp-server

Command Line Interface Reference Guide

«
...
621
622
623
624
625
...
»

Summary of Contents for 6200YL






























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 6200YL

Jetstream CPX-1000

Brand: Paradyne Pages: 93

Brand: MAGIX Pages: 88

Brand: Olympus Pages: 2

Brand: Model Technology Pages: 37

ADVANCED SERVER

Brand: ACRONIS Pages: 2

AMD-8151 HyperTransport AGP3.0

Brand: AMD Pages: 16

External OEMR 2800

Brand: Dell Pages: 32

Encryption Key Manager

Brand: Dell Pages: 66

External OEMR 2950

Brand: Dell Pages: 22

Brand: Dell Pages: 10

DVS Simplified Appliance

Brand: Dell Pages: 73

Brand: Dell Pages: 75

External OEMR 850

Brand: Dell Pages: 162

External OEMR 2850

Brand: Dell Pages: 176

Brand: Yamaha Pages: 4

Brand: Yamaha Pages: 6

Brand: Yamaha Pages: 7

Brand: Yamaha Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands