HP 6200YL Reference Manual Download Page 617

Page: 617 / 765

address_ipv6

■

snmp-server host

IPV6-ADDR

IPv6 address of SNMP notification host.

Next Available Options:

■

community

-- Name of the SNMP community (up to 32 characters). (ASCII-STR)

(p. 615)

■

informs

-- Specify if informs will be sent, rather than notifications.

(p. 618)

■

events

< None | Debug | All | ... > --

(p. 616)

arp-protect

■

[no] snmp-server enable traps arp-protect

Traps for Dynamic ARP Protection.

auth-server-fail

■

[no] snmp-server enable traps auth-server-fail

Traps reporting authentication server unreachable.

community

■

[no] snmp-server community

COMMUNITY

Usage: [no] snmp-server community ASCII-STR

[manager|operator] [restricted|unrestricted]

Description: Add/delete SNMP community.

Parameters:

o community ASCII-STR - Enter up to 32 characters to name an SNMP

community.

o <manager|operator> - manager - the community can access all MIB

objects; operator (default) - the community can access all except
the CONFIG MIB.

o <restricted|unrestricted> - unrestricted - any MIB variable that

has read/write access can be set; restricted (default) - MIB
variables cannot be set, only read.

Next Available Options:

■

view

< Operator | Manager > -- Add/delete SNMP community

(p. 622)

■

write-access

< Restricted | Unrestricted | | ... > -- Add/delete SNMP community

(p. 622)

■

snmp-server host

IP-ADDR COMMUNITY

Name of the SNMP community (up to 32 characters).

■

snmp-server host

IPV6-ADDR COMMUNITY

Name of the SNMP community (up to 32 characters).

615

2009 Hewlett-Packard Development Company, L.P.

snmp-server

Command Line Interface Reference Guide

Summary of Contents for 6200YL






























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands

HP 6200YL, Reference Manual

Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands