HP 6200YL Reference Manual Download Page 304

Page: 304 / 765

Specify how often (in minutes) the switch tries to get the current time.

Range: < 1 to 9999 >

■

ip source-binding

VLAN-ID IP-ADDR

Next Available Option:

■

mac

-- (MAC-ADDR)

(p. 304)

ip6addr

■

[no] ip dns server-address priority

< 1 to 2 > IPV6-ADDR

DNS server IPv6 address.

ipaddr

■

ip default-gateway

IP-ADDR

IPv4 address of the default gateway.

■

[no] ip dns server-address priority

< 1 to 2 > IP-ADDR

DNS server IP address.

■

ip router-id

IP-ADDR

Usage: ip router-id IP-ADDR

[no] ip router-id

Description: Define the device router id.

The no form of the command clears the router-id.

ip-addr

■

[no] ip address

IP-ADDR/MASK-LENGTH

Interface IP address/mask.

■

ip route

IP-ADDR/MASK-LENGTH

Specify IP address and mask of the route destination.

Next Available Options:

■

ip-addr

-- Specify gateway IP address. (IP-ADDR)

(p. 302)

■

vlan

-- Specify the destination VLAN. (VLAN-ID)

(p. 312)

■

reject

-- Specify that packets are discarded and ICMP error is returned to sender.

(p. 306)

■

blackhole

-- Specify that packets are silently discarded with no ICMP message sent.

(p. 296)

■

[no] ip route

IP-ADDR/MASK-LENGTH IP-ADDR

Specify gateway IP address.

Next Available Option:

■

distance

< 1 to 255 > -- Set the administrative distance to associate with this static route.

(p.

298)

302

2009 Hewlett-Packard Development Company, L.P.

Command Line Interface Reference Guide

Summary of Contents for 6200YL






























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands

HP 6200YL, Reference Manual

Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands