HP 6200YL Reference Manual Download Page 253

Page: 253 / 765

Description: Set the minimum time (in seconds) allowed between sending

unsolicited router advertisements. Must be no greater than the
maximum time between sending unsolicited router advertisements.

Range: < 3 to 1800 >

mirror

■

interface

[ETHERNET] PORT-LIST

monitor all

< In | Out | Both >

mirror

Mirror destination.

Next Available Options:

■

monitor_mirror_session_id

< 1 to 4 > -- Mirror destination number.

(p. 254)

■

mirror_session_name

-- Mirror destination name.

(p. 251)

■

interface vlan

VLAN-ID

monitor all

< In | Out | Both >

mirror

Mirror destination.

Next Available Options:

■

monitor_mirror_session_id

< 1 to 4 > -- Mirror destination number.

(p. 254)

■

mirror_session_name

-- Mirror destination name.

(p. 251)

■

interface svlan

VLAN-ID

monitor all

< In | Out | Both >

mirror

Mirror destination.

Next Available Options:

■

monitor_mirror_session_id

< 1 to 4 > -- Mirror destination number.

(p. 254)

■

mirror_session_name

-- Mirror destination name.

(p. 251)

mirror_session_name

■

[no] interface

[ETHERNET] PORT-LIST

monitor all

< In | Out | Both >

mirror

Mirror destination name.

■

[no] interface vlan

VLAN-ID

monitor all

< In | Out | Both >

mirror

Mirror destination name.

■

[no] interface svlan

VLAN-ID

monitor all

< In | Out | Both >

mirror

Mirror destination name.

mld

■

[no] interface vlan

VLAN-ID

ipv6 mld

Usage: [no] ipv6 mld [...]

Description: Enable/disable/configure IPv6 Multicast Listener Discovery (MLD)

feature on a VLAN.

This command enables, disables or

configures the MLD feature for MLD communication between
Multicast Routers, Multicast Servers, and Multicast Clients
connected to the device.

This is a VLAN context command.

251

2009 Hewlett-Packard Development Company, L.P.

interface

Command Line Interface Reference Guide

Summary of Contents for 6200YL






























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands

HP 6200YL, Reference Manual

Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands