■
-- Configure IPv6 address represented in CIDR notation.
(IPV6-ADDR/PREFIX-LEN)
advert-address
■
interface vlan
VLAN-ID
ip irdp
< multicast | broadcast >
Usage: [no] ip irdp <multicast|broadcast>
Description: Specify the destination address to be used for router
advertisements.
It has to be either multicast or broadcast. If the value
of this object is 'multicast' (the default), router
advertisements will be sent to the all-hosts multicast
address, 224.0.0.1. If the value of this object is 'broadcast',
router advertisements sent on this interface will be sent to
the limitied broadcast address, 255.255.255.255.
Supported Values:
■
multicast -- Send advertisements to all-hosts multicast address.
■
broadcast -- Send advertisements to broadcast address.
advertise-interval
■
interface vlan
VLAN-ID
vrrp vrid
< 1 to 255 >
advertise-interval
< 1 to 255 >
Usage: vrrp vrid <VRID> advertise-interval <1-255>
Description: Set time interval (in seconds) between sending VRRP advertisement
messages. The default value is one second.
Range: < 1 to 255 >
all
■
[no] interface
[ETHERNET] PORT-LIST
monitor all
< In | Out | Both >
Monitor all traffic.
Supported Values:
■
In -- Monitor all inbound traffic
■
Out -- Monitor all outbound traffic
■
Both -- Monitor all inbound and outbound traffic
Next Available Option:
■
-- Mirror destination.
■
[no] interface
[ETHERNET] PORT-LIST
rate-limit all
Set limits for all traffic.
Next Available Options:
■
-- Set limits for all inbound traffic.
■
-- Set limits for all outbound traffic.
■
[no] interface loopback
< 0 to 7 >
ip ospf all
219
©
2009 Hewlett-Packard Development Company, L.P.
interface
Command Line Interface Reference Guide
Summary of Contents for 6200YL
Page 2: ......
Page 16: ...Introduction 14 2009 Hewlett Packard Development Company L P ...
Page 22: ...Commands 20 2009 Hewlett Packard Development Company L P ...
Page 764: ......