HP 6200YL Reference Manual Download Page 199

Page: 199 / 765

border-ip

■

[no] igmp-proxy-domain

DOMAIN-NAME IP-ADDR

Specify the igmp proxy border ip address.

Next Available Options:

■

mcast-low-ip

-- Specify the igmp proxy multicast low bound (inclusive) ip address. (IP-ADDR)

(p. 197)

■

all

-- Specify ALL if the multicast range 224.0.1.0-239.255.255.255 is desired.

(p. 196)

domain-name

■

[no] igmp-proxy-domain

DOMAIN-NAME

Specify the igmp proxy domain name to be added/deleted/updated.

Next Available Option:

■

border-ip

-- Specify the igmp proxy border ip address. (IP-ADDR)

(p. 197)

mcast-high-ip

■

[no] igmp-proxy-domain

DOMAIN-NAME IP-ADDR IP-ADDR IP-ADDR

Specify the igmp proxy multicast high bound (inclusive) ip address.

mcast-low-ip

■

[no] igmp-proxy-domain

DOMAIN-NAME IP-ADDR IP-ADDR

Specify the igmp proxy multicast low bound (inclusive) ip address.

Next Available Option:

■

mcast-high-ip

-- Specify the igmp proxy multicast high bound (inclusive) ip address. (IP-ADDR)

(p. 197)

197

2009 Hewlett-Packard Development Company, L.P.

igmp-proxy-domain

Command Line Interface Reference Guide

Summary of Contents for 6200YL






























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands

HP 6200YL, Reference Manual

Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands