Managing power
6
Your computer can operate on either battery power or external power. When the computer is running on
battery power and an external power source is not available to charge the battery, it is important to monitor
and conserve the battery charge.
Some power management features described in this chapter might not be available on your computer.
Using Sleep and Hibernation
Windows has two power-saving states, Sleep and Hibernation.
IMPORTANT:
Several well-known vulnerabilities exist when a computer is in the Sleep state. To prevent an
unauthorized user from accessing data on your computer, even encrypted data, HP recommends that you
always initiate Hibernation instead of Sleep anytime the computer will be out of your physical possession.
This practice is particularly important when you travel with your computer.
IMPORTANT:
To reduce the risk of possible audio and video degradation, loss of audio or video playback
functionality, or loss of information, do not initiate Sleep while reading from or writing to a disc or an
external media card.
●
Sleep—The Sleep state is automatically initiated after a period of inactivity. Your work is saved to
memory, allowing you to resume your work very quickly. You can also initiate Sleep manually. For more
information, see
Initiating and exiting Sleep on page 32
●
Hibernation—The Hibernation state is automatically initiated if the battery reaches a critical level or the
computer has been in the Sleep state for an extended period of time. In the Hibernation state, your work
is saved to a hibernation file and the computer powers down. You can also initiate Hibernation manually.
For more information, see
Initiating and exiting Hibernation (select products only) on page 33
Initiating and exiting Sleep
You can initiate Sleep several ways.
●
Select the Start button, select the Power icon, and then select Sleep.
●
Close the display (select products only).
●
Press the Sleep hot key (select products only); for example,
fn
+
f1
or
fn
+
f12
.
●
Briefly press the power button (select products only).
You can exit Sleep in any of the following ways:
●
Briefly press the power button.
●
If the computer is closed, raise the display (select products only).
●
Press a key on the keyboard (select products only).
●
Tap the touchpad (select products only).
32
Chapter 6 Managing power
Summary of Contents for 597Y5EA
Page 10: ...x ...
Page 31: ...Connecting to a wired network LAN select products only 21 ...
