HP 470 G7 Maintenance And Service Manual Download

Page: 54 / 99

Touchpad button board

Table 6-11

Touchpad button board description and part number

Description

Spare part number

Touchpad button board

L22539-001

Touchpad button board cable

L22523-001

Before removing the touchpad button board, follow these steps:

Prepare the computer for disassembly (

Preparation for disassembly on page 25

Remove the optical drive (see

Optical drive (select products only) on page 26

Remove the bottom cover (see

Bottom cover on page 29

Remove the battery (see

Battery on page 31

Remove the touchpad button board:

Disconnect the cable from the ZIF connector on the touchpad button board (1).

Lift the cable to remove it from the adhesive that secures it to the board (2).

Remove the two Phillips M2.0 × 2.0 screws (3) that secure the board to the computer.

Remove the touchpad button board from the computer (4).

TIP:

The top edge of the board sits under clips. Be sure to slide the board out from under the clips to

prevent damage to the board or clips.

Reverse this procedure to install the touchpad button board.

Chapter 6 Removal and replacement procedures for authorized service provider parts

Summary of Contents for 470 G7




































































































Search results

Summary of Contents for 470 G7

Reviews:

Related manuals for 470 G7

Brands by name

Popular brands

HP 470 G7, Maintenance And Service Manual

Search results

Summary of Contents for 470 G7

Reviews:

Related manuals for 470 G7

Brands by name

Popular brands