HP 470 G7 Maintenance And Service Manual Download

Page: 35 / 99

Removal and replacement procedures for
Customer Self-Repair parts

This chapter provides removal and replacement procedures for Customer Self-Repair parts.

NOTE:

The Customer Self-Repair program is not available in all locations. Installing a part not supported by

the Customer Self-Repair program may void your warranty. Check your warranty to determine if Customer
Self-Repair is supported in your location.

Component replacement procedures

NOTE:

Details about your computer, including model, serial number, product key, and length of warranty,

are on the service tag at the bottom of your computer. See

Labels on page 12

for details.

NOTE:

HP continually improves and changes product parts. For complete and current information about

supported parts for your computer, go to

http://partsurfer.hp.com

, select your country or region, and then

follow the on-screen instructions.

Preparation for disassembly

See

Removal and replacement procedures preliminary requirements on page 20

for initial safety procedures.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect the power from the computer by unplugging the power cord from the computer.

Disconnect all external devices from the computer.

Component replacement procedures

Summary of Contents for 470 G7




































































































Search results

Summary of Contents for 470 G7

Reviews:

Related manuals for 470 G7

Brands by name

Popular brands

HP 470 G7, Maintenance And Service Manual

Search results

Summary of Contents for 470 G7

Reviews:

Related manuals for 470 G7

Brands by name

Popular brands