Symptom
Possible solution
Press and hold the power button on the computer for 5 or more seconds to turn off the computer. Then press the power
button again to turn on the computer.
Error message: Invalid
system disk or Non-
System disk or Disk
error
When drive activity stops, remove the optical disc inside the optical drive, and then press the
spacebar
on the keyboard.
Power
Symptom
Possible solution
Computer does not
turn off when the
power button is
pressed
Press and hold the power button until the computer turns off. Then turn the computer on again.
Computer shuts down
automatically
●
The computer might be in an exceedingly hot environment. Let it cool down.
●
Be sure that computer air vents are not blocked.
NOTE:
If your computer has an internal fan, be sure that the internal fan is running.
Display (monitor) (select products only)
Symptom
Possible solution
Screen is blank, and
monitor power light is off
Reconnect the power cable to the back of the monitor and to the AC outlet.
Press the power button on the monitor.
Screen is blank
Press the
space bar
on the keyboard or move the mouse to redisplay the screen image.
Press the Sleep button (select products only) or
esc
, to resume from Sleep mode.
Press the power button to turn on the computer.
Inspect the monitor cable for bent pins.
●
If any of the pins are bent, replace the monitor cable.
●
If no pins are bent, reconnect the monitor cable to the computer.
Images on the screen are
too large or too small, or
the images are fuzzy
Adjust the monitor resolution setting in Windows.
▲
Select the Start button, select the Settings icon
, and then select System. Under Display, select the
appropriate resolution, and then select Keep changes.
NOTE:
In addition to the information listed here, refer to the documentation that came with your monitor.
22
Chapter 7 Troubleshooting
