manualshive.com logo in svg

HP 4200 - LaserJet B/W Laser Printer, User Manual

Share
Download
HP 4200 - LaserJet B/W Laser Printer User Manual Download Page 23

Menu

The menu is always displayed on the left side of the any displayed page in the web interface. Click on any of the
following topics listed on the menu for more information:

General

Overview
Date/Time
Admin Accounts
Diagnostics
Event Log
Install Upgrade
Restart Appliance

Network Settings

TCP/IP
Microsoft Networking
LPD Settings

Print Services

Printers
Driver Management

Backup/Restore

Backup Settings
Restore Settings

Overview Page

The following information is displayed on the Overview page:

Print Server Appliance Name

Name as entered on the 

Microsoft Networking Settings page

 under Network

Settings.

IP Address

IP address for the appliance as entered on the 

TCP/IP page

 under Network

Settings.

MAC Address

Hardware address for the appliance.

Serial Number

Serial number for the appliance.

Firmware revision

Firmware revision number currently on the appliance.

Printers

Number of printers currently managed by the appliance.

Jobs Pending

Number of print jobs waiting to be printed for all of the printers managed by the
appliance.

Summary of Contents for 4200 - LaserJet B/W Laser Printer















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands