manualshive.com logo in svg

HP 40gs, User Manual

Share
Download
HP 40gs User Manual Download Page 123

Statistics aplet

10-19

For instance, the data set (1,1), (3,9), (4,16), (2,4) would 
be plotted and traced in the order (1,1), (2,4), (3,9), 
(4,16).

Trouble-shooting a plot

If you have problems plotting, check that you have the 
following:

•

The correct 

 or 

 menu label on (Numeric 

view).

•

The correct fit (regression model), if the data set is 
two-variable. 

•

Only the data sets to compute or plot are 
checkmarked (Symbolic view).

•

The correct plotting range. Try using 

 Auto 

Scale (instead of 

), 

or

 adjust the plotting 

parameters (in Plot Setup) for the ranges of the axes 
and the width of histogram bars (

HWIDTH

).

In 

 mode, ensure that both paired columns contain 

data, and that they are the same length.

In 

 mode, ensure that a paired column of frequency 

values is the same length as the data column that it refers 
to.

Exploring the graph

The Plot view has menu keys for zooming, tracing, and 
coordinate display. There are also scaling options under 

. These options are described in“Exploring the 

graph” on page 2-7.

Statistics aplet’s PLOT view keys

Key

Meaning 

CLEAR

Erases the plot.

Offers additional pre-defined views 
for splitting the screen, overlaying 
plots, and autoscaling the axes.

 

 

 

 

Moves cursor to far left or far right.

hp40g+.book  Page 19  Friday, December 9, 2005  1:03 AM

Summary of Contents for 40gs





























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands