HP 3PAR HP-UX 11i v2 Page 44 Implementation Manual Download

Page: 44 / 48

Prepare boot volume on HP 3PAR Storage System.

Refer to

“Creating Storage on the HP 3PAR Storage System” (page 17)

to setup the boot

volume and export it to the host. Use the WWN recorded in

Step 1

Connect cable between host HBA port and HP 3PAR Storage System HBA port. Both direct
and fabric connections are supported.

Power on host and check MP firmware level, refer to section 7 for requirements. Upgrade
firmware if needed. Then insert installation DVD and boot from DVD to this point:

Installation from HP-UX 11i v2 or 11i v3 DVDs

Use the procedure described in HP-UX 11i v2 and 11i v3 Implementation Guide from

http://

docs.hp.com

Insert the DVD into the HP-UX host server, and the following screen appears:

Welcome to the HP-UX installation/recovery process!

Use the <tab> key to navigate between fields, and the arrow keys

within fields. Use the <return/enter> key to select an item.

Use the <return/enter> or <space-bar> to pop-up a choices list. If the

menus are not clear, select the "Help" item for more information.

Hardware Summary: System Model: 9000/800/rp7420

+----------------------+---------------+--------------------+[ Scan Again ]

| Disks: 1 ( 33.9GB)| Floppies: 0 | LAN cards: 3 |

| CD/DVDs: 1 | Tapes: 0 | Memory: 2040Mb |

| Graphics Ports: 0 | IO Buses: 7 | CPUs: 4 |[ H/W Details ]

+----------------------+---------------+--------------------+

[ Install HP-UX ]

[ Run an Expert Recovery Shell ]

[ Advanced Options ]

[ Reboot ] [ Help ]

Select

H/W Details

to verify that the HP 3PAR Storage System VV is visible.

[ H/W Details ]

Disk Drives:

Model Capacity(Mb) WWID

HP_36.4GST33675 34732 0x0011c6fffe28ddfc

1/0/0/3/0.0x6.0x0

3PARdataVV 36864 0x50002ac0001000b4

1/0/6/1/0.0x21410002ac0000b4.0x4320000000000000

Select

Root Disk

then select

3PARdataVV

/opt/ignite/bin/itool () +

¦ ¦

¦ +-------++----------++--------++-------------++----------+ ¦

¦ ¦ Basic ¦¦ Software ¦¦ System ¦¦ File System ¦¦ Advanced ¦ ¦

¦ ¦ \-------------------------------------------------------------------+¦

¦ ¦ ¦¦

¦ ¦ Configurations: [ HP-UX B.11.31 Default ->] [ Description... ] ¦¦

¦ ¦ ¦¦

¦ ¦ Environments: [ HP-UX Data Center Operatin ->] (HP-UX B.11.31) ¦¦

¦ ¦ ¦¦

¦ ¦ [ Root Disk ] HP_36.4GST336753LC, 1/0/0/3/0.0x6.0x0, 3> ¦¦

¦ ¦ ¦¦

¦ ¦ File System: [ Logical Volume Manager (LVM) with VxFS ->] ¦¦

Booting the Host from the HP 3PAR Storage System

Summary of Contents for 3PAR HP-UX 11i v2

















































Search results

Summary of Contents for 3PAR HP-UX 11i v2

Reviews:

Related manuals for 3PAR HP-UX 11i v2

Brands by name

Popular brands

HP 3PAR HP-UX 11i v2, Implementation Manual

Search results

Summary of Contents for 3PAR HP-UX 11i v2

Reviews:

Related manuals for 3PAR HP-UX 11i v2

Brands by name

Popular brands