[Sysname-route-policy] apply cost 120
apply cost-type
Syntax
apply cost-type
{
external
|
internal
|
type-1
|
type
-
2
}
undo
apply cost-type
View
Routing policy view
Default level
2: System level
Parameters
external
: Sets the cost type to IS-IS external route.
internal
: Sets the cost type to IS-IS internal route, or sets the MED value for a matching BGP route
as the IGP metric to the route’s next hop.
type-1
: Sets the cost type to Type-1 external route of OSPF.
type-2
: Sets the cost type to Type-2 external route of OSPF.
Description
Use
apply cost-type
to set a cost type for routing information.
Use
undo apply cost-type
to remove the clause configuration.
No cost type is set for routing information by default.
•
Used for IS-IS, the
apply cost-type internal
command sets the cost type of a matching IS-IS
route as IS-IS internal route.
•
Use for BGP, the
apply cost-type internal
command sets the MED of a matching BGP route
learned from an IBGP peer as the IGP metric to the route’s next hop before BGP advertises the
route to an eBGP peer.
Examples
# Create node 10 in
permit
mode of routing policy
policy1
: If a route has a tag of 8, set the cost type
for the route to IS-IS internal route.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match tag 8
[Sysname-route-policy] apply cost-type internal
apply extcommunity
Syntax
apply extcommunity
{ {
rt
route-target
}&<1-16> [
additive
] }
undo apply extcommunity
View
Routing policy view
Default level
2: System level
412
