manualshive.com logo in svg

HP 345646-001 - StorageWorks NAS 2000s External Storage Server, Administration Manual

The HP 345646-001 StorageWorks NAS 2000s External Storage Server is a powerful storage solution equipped with advanced features. To help you navigate and manage its functionalities seamlessly, we provide a comprehensive Administration Manual. You can conveniently download this manual for free from our website, allowing you to maximize the potential of your storage server.

Share
Download
background image

Storage Management Overview

45

NAS 2000s Administration Guide

Storage Elements Overview

Note:  

Each fully populated HP StorageWorks 4300/4400 Family storage enclosure supports up to 

14 hard drives.

Preliminary physical storage management tasks involve managing:

■

Physical Hard Drives

■

Arrays

■

Logical Drives (LUNs)

Drive array concepts and data protection methods, including fault tolerance options are 
discussed in this section. This information will help guide decisions on how to best configure 
the arrays.

Physical Hard Drives

For personal or small business use, the capacity and performance of a single hard drive is 
adequate. However, larger businesses demand higher storage capacities, higher data transfer 
rates, and greater security from data loss if drives fail.

Merely adding extra drives to the system increases the total storage capacity, but has little 
effect on the system efficiency, because data can only be transferred to one hard drive at a time. 

Figure 20

 illustrates the read/write process with separate physical hard drives.

Figure 20:  Separate physical drive (P1, P2, P3) read/write (R/W) operations

Arrays

With an array controller installed in the system, the capacity of several physical drives can be 
logically combined into one or more logical units called arrays. When this is done, the 
read/write heads of all the constituent physical drives are active simultaneously, dramatically 
reducing the overall time required for data transfer.

R/W

P1

P2

P3

Summary of Contents for 345646-001 - StorageWorks NAS 2000s External Storage Server









































































































































































































Reviews:

No comments

Related manuals for 345646-001 - StorageWorks NAS 2000s External Storage Server

NEC Univerge SV8100 System Specifications preview
Univerge SV8100
Brand: NEC Pages: 2
Linksys WRT54G3G-AT Product Data preview
WRT54G3G-AT
Brand: Linksys Pages: 2
Kanguru Defender Basic Quick Start Manual preview
Defender Basic
Brand: Kanguru Pages: 17
Watchguard Firebox SOHO 6 Wireless Instructions Manual preview
Firebox SOHO 6 Wireless
Brand: Watchguard Pages: 8
MikroTik RouterBOARD SXT 5HnD Quick Setup Manual And Warranty Information preview
RouterBOARD SXT 5HnD
Brand: MikroTik Pages: 2
Fortinet FortiAP S311C Quick Start Manual preview
FortiAP S311C
Brand: Fortinet Pages: 20
H3C S12500R-2L Installation Manual preview
S12500R-2L
Brand: H3C Pages: 77
GDC SX-2000A Series User Manual preview
SX-2000A Series
Brand: GDC Pages: 185
Sun Microsystems Netra t 1120 Service Manual preview
Netra t 1120
Brand: Sun Microsystems Pages: 148
POCKetec POCKEY User Manual preview
POCKEY
Brand: POCKetec Pages: 19
IBM Deskstar 16GP Installation Manual preview
Deskstar 16GP
Brand: IBM Pages: 2
AOpen ISDN SOHO Router User Manual preview
ISDN SOHO Router
Brand: AOpen Pages: 89
Perle IOLAN MDC User Manual preview
IOLAN MDC
Brand: Perle Pages: 491
Patton ipRocketLink 3101 Series Getting Started Manual preview
ipRocketLink 3101 Series
Brand: Patton Pages: 119
Quatech WLNG-AN-DP500 Series Reference Manual preview
WLNG-AN-DP500 Series
Brand: Quatech Pages: 120
Atos BullSequana Edge nano User Manual preview
BullSequana Edge nano
Brand: Atos Pages: 29
Hama 55051 Operating Instructions Manual preview
55051
Brand: Hama Pages: 8
Supermicro SUPERSERVER 5025M-UR User Manual preview
SUPERSERVER 5025M-UR
Brand: Supermicro Pages: 130

Brands by name

Popular brands

Load more brands