8
Step Command
Remarks
2.
Configure an IPv6 static route.
ipv6 route-static
ipv6-address prefix-length
{ interface-type interface-number
[ next-hop-address ] | next-hop-address }
[
preference
preference-value ]
Required
The default
preference of IPv6
static routes is 60.
NOTE:
If you specify a broadcast interface, such as a VLAN interface, as the output interface for a static route,
you must specify the next hop address.
Displaying and maintaining IPv6 static routes
Task Command
Remarks
Display IPv6 static route
information.
display ipv6 routing-table
protocol
static
[
inactive
|
verbose
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view
Remove all IPv6 static routes.
delete ipv6
static-routes all
Available in system view
To delete a single IPv6 static route, use the
undo ipv6 route-static
command. To delete all IPv6 static
routes, including the default route, use the
delete ipv6 static-routes all
command.
For more information about the
display ipv6 routing-table protocol static
[
inactive
|
verbose
] [
|
{
begin
|
exclude
|
include
}
regular-expression
] command, see
Layer 3—IP Routing Command Reference
.
