Notes
For fiber patch cords, use Ultra Physical Contact (UPC) surface
termination/polish. Angled Physical Contact (APC) is not recommended.
Services
Refer to the HP website at:
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP X132 10G SFP+ LC LR
Transceiver
(J9151A)
A 10-Gigabit transceiver in
SFP+ form-factor that
supports the 10-Gigabit LR
standard, providing 10-
Gigabit connectivity up to
10 km on single-mode
fiber.
Ports
1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-LR); Duplex: full only
Connectivity
Connector type
LC
Wavelength
1310 nm
Physical characteristics
Dimensions
2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19
cm)
Weight
0.04 lb. (.02 kg)
Transceiver form factor
SFP+
Environment
Operating temperature
32°F to 158°F (0°C to 70°C)
Operating relative
humidity
0% to 85%, noncondensing
Nonoperating/Storage
temperature
-40°F to 185°F (-40°C to 85°C)
Altitude
up to 10,000 ft. (3 km)
Electrical characteristics Power consumption
typical
0.9 W
Power consumption
maximum
1 W
Cabling
Cable type:
Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and
ISO/IEC 793-2 Type B1;
Maximum distance:
2m-10km with 9/125 µm single-mode cable
Cable length
2m to 10km
Fiber type
Single Mode
Notes
Conditioning patch cord cables are not supported.
For fiber patch cords, use Ultra Physical Contact (UPC) surface
termination/polish. Angled Physical Contact (APC) is not recommended.
Services
Refer to the HP website at:
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
QuickSpecs
HP 2910 al Switch Series
Accessory Product Details
DA - 13280 Worldwide — Version 20 — December 12, 2013
Page 31
